User's Manual

7
Parameter
Description
The number cannot be changed when the VTO serves as the SIP
server.
Periods in which
Calls can be Made
Configure the time if you only want to receive calls from VTH during a
specific period.
Group Call
Enable it on the VTO that works as the SIP server, and when a main
VTH receives a call, all extension VTHs will also receive the call.
Storage Point SD card by default.
Total SD Card
Capacity
Displays the total and used capacity of the SD card. You can click
Format to delete all the data in the SD card.
SD Used Capacity
Format
Auto Capture
(Unlock)
When the door is unlocked, the VTO will take two snapshots and
save them to the SD card.
Auto Capture
(Calling)
Take a snapshot and save it in the SD card of the VTO when the VTO
is calling.
Upload Video
Messages
When enabled:
If an SD card is inserted in both the VTH and VTO, the video
message will be saved both in the SD cards of the VTH and the
VTO.
If an SD card is only inserted in the VTH or the VTO, the video
message will be saved only in the SD card of the VTH or the
VTO.
If no SD card is inserted in the VTH or VTO, no video message
will be saved.
Auto Recording
(Call)
Take recording when the VTO is in a call, and save the recording in
the SD card of the VTO.
Click Save.
Façade Layout
Only the VTO model that with multiple buttons has this web function.
Log in to the VTO web page.
Select Local Settings > Basic.
In the Façade Layout section, select Count types.
Count 1: Can only bind one room number.
Count 2: Can bind two room numbers.
Count 4: Can bind four room numbers.