User's Manual

26
6 Network
This chapter introduces how to configure the network parameters.
Basic
6.1.1 TCP/IP
You need to configure the TCP/IP information to connect the VTO to the network. The
descriptions below are for models with a Wireless LAN card. A Wireless LAN device is optional.
Wireless LAN
Log into the VTO web page.
Select Network > Basic.
Configure the TCP/IP parameters in the WLAN section.
LAN
Log into the VTO web page.
Select Network > Basic.
Configure the TCP/IP parameters in the LAN section.
Network configuration
Table 6-1 Parameter description
Parameter Description
IP Address Your planned IP address for the VTO.
Preferred DNS The default is 8.8.8.8.
Alternate DNS The default is 8.8.4.4.
Transmission
Mode

Mode 1: Multicast streaming (UDP).

Mode 2: RTSP streaming (TCP).

It is transmission Mode 1 by default.
DHCP Enable the function to get the allocated IP address for the VTO.
6.1.2 Port