User's Manual

36
We recommend you to bind the IP and MAC address of the gateway to the device, thus
reducing the risk of ARP spoofing.
8. Assign Accounts and Privileges Reasonably
According to business and management requirements, reasonably add users and assign a
minimum set of permissions to them.
9. Disable Unnecessary Services and Choose Secure Modes
If not needed, we recommend turning off some services such as SNMP, SMTP, UPnP, etc.,
to reduce risks.
If necessary, it is highly recommended that you use safe modes, including but not limited to
the following services:
 SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication
passwords.
 SMTP: Choose TLS to access mailbox server.
 FTP: Choose SFTP, and set up strong passwords.
 AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords.
10. Audio and Video Encrypted Transmission
If your audio and video data contents are very important or sensitive, we recommend that
you use encrypted transmission function, to reduce the risk of audio and video data being
stolen during transmission.
Reminder: encrypted transmission will cause some loss in transmission efficiency.
11. Secure Auditing
 Check online users: we suggest that you check online users regularly to see if the
device is logged in without authorization.
 Check device log: By viewing the logs, you can know the IP addresses that were used
to log in to your devices and their key operations.
12. Network Log
Due to the limited storage capacity of the device, the stored log is limited. If you need to
save the log for a long time, it is recommended that you enable the network log function to
ensure that the critical logs are synchronized to the network log server for tracing.
13. Construct a Safe Network Environment
In order to better ensure the safety of device and reduce potential cyber risks, we
recommend:
 Disable the port mapping function of the router to avoid direct access to the intranet
devices from external network.
 The network should be partitioned and isolated according to the actual network needs.
If there are no communication requirements between two sub networks, it is
suggested to use VLAN, network GAP and other technologies to partition the network,
so as to achieve the network isolation effect.
 Establish the 802.1x access authentication system to reduce the risk of unauthorized
access to private networks.
 Enable IP/MAC address filtering function to limit the range of hosts allowed to access
the device.