User's Manual

User’s Manual
7
6 Configuration
You can view and edit general information of the button.
6.1 Viewing Status
On the hub screen, select a button from the accessory list, and then you can view the status of
the button.
Table 6-1 Status
Parameter Value
Temporary Deactivate
The status for whether the functions of the repeater are
enabled or disabled.
●
: Enable.
●
: Only disable tamper alarm.
●
: Disable.
The function is only available when the version of the DMSS
app is 1.96 or later, the hub is V1.001.0000000.6.R.211215 or
later, and the button is V1.000.0000001.0.R.20211203 or later.
Battery Level
The battery level of the button.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
●
: Low.
Operation Mode
The working mode of the button.
LED Brightness The brightness of LED lights.
Accidental Press
Protection
The status for whether the accidental press protection function
is enabled or disabled.
Relay Status
The status of whether the button forwards accessory messages
to the hub through the repeater.
The function is only available when the version of the DMSS
app is 1.96 or later, the hub is V1.001.0000000.6.R.211215 or
later, and the button is V1.000.0000001.0.R.20211203 or later.
Program Version The program version of the button.