User's Manual

User's Manual
8
Parameter Description
External Detector Status
Select
Normally Closed
or
Normally Open
for the external
detector.
Alarm Type
Select an alarm type based on the external detector type, and
then tap
OK
.
●
Intrusion
●
Fire Alarm
●
Medical Help
●
Panic Button
●
Gas Alarm
Alarm Input Type
Select an alarm input type for the external detector, and then tap
OK
.
●
Detector
.
●
Tamper
.
For example, if you select
Tamper
for the external detector,
only tamper alarm messages will be sent to the alarm hub.
LED Indicator
LED Indicator
is enabled by default. For details on indicator
behavior, see "3.1 Appearance".
If
LED Indicator
is disabled, the LED indicator will remain off
regardless of whether the input expander is functioning
normally or not.
Signal Strength Detection Test the current signal strength.
Detector Test Detect whether the accessory works.
Transmit Power
●
Select from high, low, and automatic.
●
The higher the transmission power, the farther the
transmission and the higher power consumption.
Cloud Update Update online.
Delete
Delete the online accessory.
Go to the
Hub
screen, select the accessory from the list, and then
swipe left to delete it.
6.2 Status
On the
Hub
screen, select the input expander as needed from the accessory list to view the status of
the input expander.