User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
6
Table 2-3 Auto registration
Parameter Description
Server Address The IP address of the management platform.
Port The port No. of the management platform.
Device ID
Enter the device ID (user defined).
When you add the Time & Attendance to the management
platform, the device ID on the management platform must
conform to the defined device ID on the Time & Attendance.
Step 3 Enable the active register function.
2.6.2 Configuring Wi-Fi
You can connect the Time & Attendance to the network through Wi-Fi network.
Wi-Fi function is only available for certain models of the Time & Attendance.
Step 1 On the
Main Menu
, select
Connection
>
Network
>
WiFi
.
Step 2 Turn on Wi-Fi.
Step 3 Tap to search available wireless networks.
Step 4 Select a wireless network and enter the password.
If no Wi-Fi is searched, tap
SSID
to enter the name of Wi-Fi.
Step 5 Tap
2.7 User Management
You can add new users, view user/admin list and edit user information.
The pictures in this manual are for reference only, and might differ from the actual product.
2.7.1 Adding New Users
Step 1 On the
Main Menu
, select
User
>
New User
.
Step 2 Configure the parameters on the interface.