User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
19
2.10 USB Management
You can use a USB to update the Time & Attendance, and export or import user information through
USB.
●
Make sure that a USB is inserted to the Time & Attendance before you export data or update the
system. To avoid failure, do not pull out the USB or perform any operation of the Time &
Attendance during the process.
●
You have to use a USB to export the information from the Time & Attendance to other devices.
Face images are not allowed to be imported through USB.
2.10.1 Exporting to USB
You can export data from the Time & Attendance to a USB. The exported data is encrypted and
cannot be edited.
Step 1 On the
Main Menu
, select
USB
>
USB Export
.
Step 2 Select the data type you want to export, and then tap
OK
.
Figure 2-18 USB export
2.10.2 Importing From USB
You can import data from USB to the Time & Attendance.
Step 1 On the
Main Menu
, select
USB
>
USB Import
.
Step 2 Select the data type that you want to export, and then tap
OK
.