User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
49
4 Smart PSS Lite Configuration
This section introduces how to manage and configure the Time & Attendance through Smart PSS
Lite. You can also configure time attendance rules on the platform, such as shifts, modes, schedules
and more. For details, see the user's manual of Smart PSS Lite.
4.1 Installing and Logging In
Install and log in to Smart PSS Lite. For details, see the user manual of Smart PSS Lite.
Step 1 Get the software package of the Smart PSS Lite from the technical support, and then install
and run the software according to instructions.
Step 2 Initialize Smart PSS Lite when you log in for the first time, including setting password and
security questions.
Set the password is for the first-time use, and then set security questions to reset your
password when you forgot it.
Step 3 Enter your username and password to log in to Smart PSS Lite.
4.2 Adding Devices
You need to add the Time & Attendance to Smart PSS Lite. You can add them in batches or
individually.
4.2.1 Adding Individually
You can add Time & Attendance individually by entering their IP addresses or domain names.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Device Manager
and click
Add
.
Step 3 Enter the device information.