User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
50
Figure 4-1 Device information
Table 4-1 Device parameters Description
Parameter Description
Device Name
Enter a name of the Time & Attendance. We recommend you
name it after its installation area.
Method to add
Select
IP
to add the Access Terminal by entering its IP Address.
IP Enter IP address of the Time & Attendance.
Port The port number is 37777 by default.
User Name/Password Enter the username and password of the Access Terminal.
Step 4 Click
Add
.
The added Time & Attendance displays on the
Devices
page. You can click
Add and
Continue
to add more Time & Attendances.
4.2.2 Adding in Batches
We recommend you use the auto-search function when you add want to Time & Attendances in
batches. Make sure the Time & Attendances you add must be on the same network segment.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Device Manager
and search for devices.
●
Click
Auto Search
, to search for devices on the same LAN.
●
Enter the network segment range, and then click
Search
.