User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
53
After adding a card, you can set the card to main card or duress card, or replace the
card with a new one, or delete the card.
●
Configure fingerprint.
1. On the
Fingerprint
area, click and select
Fingerprint Scanner
, and then click
OK
.
2. Click
Add Fingerprint
, press your finger on the scanner three times in a row.
Figure 4-4 Add password, card, and fingerprint
Step 5 Configure permissions for the user. For details, see #d894e6a1026.
Step 6 Click
Finish
.
4.3.2.2 Adding in Batches
You can add users in batches.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Personnel Manger
>
User
>
Batch Add
.
Step 3 Select
Card issuer
from the
Device
list, and then configure the parameters.