User's Manual

5
Unlocking Methods
2.6.1 Card
Swipe your card on the card-reading area to unlock the door.
2.6.2 Fingerprint
Press your registered fingerprint on the fingerprint scanner to unlock the door.
2.6.3 User Password
Enter the user ID and password of a user to unlock the door.
Select on the standby interface.
Select PWD, and then tap OK.
Enter the user ID and password of a user.
 To enter the user ID, you need to select the input box of user ID and tap OK.
 You can directly enter the password on the keypad.
 Tap to change the input method.
Select OK, and then tap OK.
The system will prompt that the door is unlocked.
2.6.4 Administrator Password
If you enable and set up the administrator password, you can use it to unlock the door. Except
when the device is set to the normally open or closed status, you will not be restricted by user
ID, unlocking methods, time section, holiday plan, and anti-passback. The device can only
support one administrator password.
To use the administrator password, you need to enable the function and set it up. See "2.7.3
Administrator Password".
Select on the standby interface.
Select Admin PWD, and then tap OK.
Enter the administrator password.
Select OK, and then tap OK.
The door is unlocked.