User's Manual

10
 Or: For example, you only need to verify your card or fingerprint to unlock the door.
Element (Multiple Choice)
Tap Esc.
The system will ask you to save the settings or not.
Tap OK.
2.8.2 Lock Holding Time
The door will be unlocked during the defined duration, and will be locked after the duration.
On the main menu, select Access > Lock Holding.
Tap OK, and then enter the value you need.
Tap to change the input method.
Communication
Configure the network, serial port and Wiegand port parameters to properly connect the device
to the network or other devices.
2.9.1 IP Configuration
Set up an IP address for the device to connect it to the network. Then you can log in to the web
interface of the device to make configurations, and add it to SmartPSS AC.
On the main menu, select Comm > IP Address.
Select and tap OK to configure parameters.