User's Manual

Set up network parameters

Table 2-4 Parameter description

Parameter

Description

IP address,

subnet mask

and gateway

The IP address, subnet mask, and gateway IP address should be on the

same network segment. After configuration, tap to save the

configurations.

DHCP

It stands for Dynamic Host Configuration Protocol.

When it is enabled, the device will automatically obtain an IP address. IP

address, subnet mask, and gateway cannot be configured.

P2P

When it is enabled, you can directly manage the device without a dynamic

domain, relay server, or port mapping.

2.9.2 Wi-Fi

Connect the device to a wireless network.

Only certain models support Wi-Fi.

On the main menu, select Comm > Wi-Fi, and then tap OK.

Wi-Fi

Select Wifi Search, and then tap OK.

Select WiFi, and then tap OK to enable the wifi function.