User's Manual

12
The device will search for and display available wireless networks.
Tap or to go to the previous or next page.
Select a wireless network, tap OK, and enter the password.
The device will go back to the previous interface, and the information of the wireless
network you connected to is displayed.
2.9.3 Wiegand
Select Wiegand input or output as needed.
On the main menu, select Comm > Wiegand, and then tap OK.
 Select Wiegand Input when you need to connect a card reader to the device.
 Select Wiegand Output when the device works as a card reader, and you need to connect
it to another access controller.
Wiegand
Table 2-5 Wiegand parameters description
Parameter
Description
Wiegand output type
Determines whether the device can reads a card number or the digits
of a card number.
Wiegand26: Reads three bytes or six digits.
Wiegand34: Reads four bytes or eight digits.
Wiegand66: Reads eight bytes or sixteen digits.
Pulse Width
Enter the value as needed.
Pulse Interval
Output Data Type
UserID: Outputs the ID of the user who swipes a card.
Card No.: Outputs the card number that is used.
2.9.4 Serial Port
Select a type as needed.