User's Manual

33
Parameter
Description
RTSP Port
Default value is 554.
Click OK to complete the setting.
3.9.3 Register
When connected to external network, the device will report its address to the server that is
designated by the user so that clients can get access to the device.
Log in to the web interface.
Select Network Setting > Auto Register.
Select Enable, and enter host IP, port, and sub device ID.
Table 3-5 Auto register description
Parameter
Description
Host IP
Server IP address or server domain name.
Port
Server port used for auto registeration.
Sub Device ID
Access controller ID assigned by the server.
Click OK to complete the setting.
3.9.4 P2P
Peer-to-peer computing or networking is a distributed application architecture that partitions
tasks or workloads between peers. Users can download mobile application by scanning QR
code, and then register an account so that more than one access controller can be managed on
the mobile app. You do not need to apply dynamic domain name, do port mapping or do not
need transit server.
If you want to use P2P, you must connect the device to the Internet; otherwise this function
cannot work properly.
P2P