User's Manual

34
Log in to the web interface.
Select Network Setting > P2P.
Select Enable to enable the P2P function.
Click OK.
Scan the QR code on your web interface to get the serial number of the device.
Date Setting
You can configure time zone, system time, DST (Daylight Saving Time) or NTP server.
Log in to the web interface.
Click Date Setting.
Date setting
Table 3-6 Data setting description
Parameter
Description
Time Zone
Configure the time zone as needed.
System Time
Configure system time.
Click Sync with PC, and the system time changes to the PC time.
DST
1. Enable DST as needed.
2. Select Date or Week in Sate Setting.
3. Configure start time and end time.