User's Manual

37
Table 3-7 Description of adding IP parameters
Parameter
Description
Type
Select IP address, IP segment, MAC address or all IP addresses.
IP address: Select IP version and enter the IP address of the host to
be added.
IP segment: Select IP version and enter the start address and end
address of the segment to be added.
MAC address: Enter MAC address of the host to be added.
All IP addresses: Set all IP addresses in allowlist or restricted list.
Al Ports
Set access ports. You can select all ports or the ports in defined areas.
Device all ports: Set all IP port in allowlist or blocklist. When selecting
Blocklist in Mode, and All IP Address in Rule Type, you cannot
select the Device All Ports check box.
Device start server port and Device end server port: Set Device start
server port and device end server port, and the range is 1–65535.
Device Start
Server Port
Device End
Server Port
Click Save, and the IP Authority interface is displayed.
Click OK.
Other Operations
 Click to edit the allowlist or blocklist.
 Click to delete the allowlist or blocklist
3.11.1.3 Prohibit PING
Set Type to Prohibit PING.
Select the Enable check box.
Prohibit PING
Click OK.
3.11.1.4 Anti Half Connection
Set Type to Anti Half Connection.