User's Manual

47
3.14.2 Importing Configuration File
You can import the configuration file that is exported from an access controller to another access
controller with the same model.
Log in to the web interface.
Select Config Mgmt. on the navigation bar.
On the configuration management interface, click Browse to select the configuration file
that you want to import, and then click Import configuration.
The device will restart after importing configuration file.
3.14.3 Default
Be careful when doing this operation. It will restore the device to default configuration, and
result in data loss.
 Restore Factory: Reset all the data and configuration of the device.
 Restore Factory (Save user & log): Reset all data and configuration, except for user
information and logs.
Log in to the web interface.
Select Config Mgmt. >Default.
Default
Upgrade
 Export the configuration file for backup before upgrade, and then import it after the upgrade
is completed.
 Make sure that the upgrade file has been obtained. You can get it from technical support.
 Do not disconnect the power or network, or restart or shutdown the device during upgrade.
Log in to the web interface.
Select Upgrade on the navigation bar.