User's Manual

53
4.2.2 In Batches
We recommend adding devices by auto search when you need to add devices in batches within
the same network segment, or when the network segment is clear but the device IP address is
unclear.
Log in to SmartPSS AC.
Click Device Manager on the lower-left corner.
Devices
Click Auto Search.
Auto search
Enter the network segment, and then click Search.
A search result list will be displayed.
 Click Search to refresh the device list.
 Select a device, and then click Modify IP to modify its IP address, subnet mask,
and gateway.
Select devices that you want to add to the SmartPSS AC, and then click Add.
Enter the username and the login password to login.
You can see the added devices on the Devices interface.
 The username is admin and password is admin123 by default. We recommend
changing the password after login.