User's Manual

54
 After adding, SmartPSS AC logs in to the device automatically. If succeeded, the
status of the device will be Online. Otherwise, it is Offline.
Other Operation
 : Edit the information of the device, including device name, IP address, port number,
username, and password.
You can also double-click the device to edit its information.
 : Goes to the device configuration interface. You can set up the time, update the device,
restart the device, and extract user information or attendance records from the device.
 and : Log in to and out of the device.
 : Delete the device.
User Management
Add users, issue cards to them, and configure their access permissions.
4.3.1 Setting Card Type
Before issuing card, set card type first. For example, if the issued card is ID card, set type to ID
card.
Card types must be the same as card issuer types; otherwise, card numbers cannot be read.
Log in to SmartPSS AC.
Click Personnel Manager.
Personnel manager
On the Personnel Manager interface, click , then click .
On the Setting Card Type interface, select a card type.
Click to select display method of card number in decimal or in hex.