User's Manual

56
Add basic information
Click the Certification tab to add certification information of the user.
 Configure password.
The password must consist of 6–8 digits.
 Configure card.
The card number can be read automatically or entered manually. To read the card
number automatically, select a card reader, and then place the card on the card
reader.
1) Click , set Card Reader to Device, and then select the device you add from
Device.
2) Click Add, swipe a card on the device, and then the card number will be displayed.
3) Click OK.
4) After adding a card, you can set the card to main card or duress card, or replace
the card with a new one, or delete the card.
 Configure fingerprint.
1) Click , set Fingerprint Collector to Device.