User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
4
●
If there is no operation in 30 seconds, the Access Controller will go to the standby mode.
●
This manual is for reference only. Slight differences might be found between the standby screen
in this manual and the actual device.
Figure 2-2 Homepage
Table 2-2 Home screen description
No. Name Description
1 Status display Displays status of Wi-Fi, network and USB, and more.
2 Date and time Displays the current date and time.
3 Verification methods Displays available verification methods.
4 Password
Enter user password or administrator password to
unlock the door.
5 QR code
Tap the QR code icon and scan QR code to unlock the
door.
6 Intercom
When the Access Controller functions as a server, it can
call the VTO and VTH.
When the DSS functions as a server, The Access
Controller can call the VTO, VTS and DSS. Tap the icon,
enter the room number to call the home owner.
2.4 Initialization
For the first-time use or after restoring factory defaults, you need to select a language on Access
Controller, and then set the password and email address for the admin account. You can use the
admin account to log in to the main menu of the Access Controller and the webpage.