User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
6
Figure 2-3 IP address configuration
Table 2-3 IP configuration parameters
Parameter Description
IP Address/Subnet Mask/Gateway
Address
The IP address, subnet mask, and gateway IP address
must be on the same network segment.
DHCP
It stands for Dynamic Host Configuration Protocol.
When DHCP is turned on, the Access Controller will
automatically be assigned with IP address, subnet mask,
and gateway.
P2P
P2P (peer-to-peer) technology enables users to manage
devices without applying for DDNS, setting port mapping
or deploying transit server.
2.6.2 Active Register
You can turn on the automatic registration function to access the Access Controller through the
management platform.
The management platform can clear all personnel configurations and initialize the Access Controller.
To avoid data loss, keep the management platform permissions properly.
Step 1 On the
Main Menu
, select
Connection
>
Network
>
Active Register
.