User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
7
Figure 2-4 Auto register
Step 2 Turn on the automatic registration function and set the parameters.
Table 2-4 Auto registration
Parameter Description
Server Address The IP address of the management platform.
Port The port No. of the management platform.
Device ID
Enter the device ID (user defined).
When you add the Access Controller to the management
platform, the device ID on the management platform must
conform to the defined device ID on the Access Controller.
Step 3 Enable the active register function.
2.6.3 Configuring Wi-Fi
You can connect the Access Controller to the network through Wi-Fi network.
Wi-Fi function is only available for certain models of the Access Controller.
Step 1 On the
Main Menu
, select
Connection
>
Network
>
WiFi
.
Step 2 Turn on Wi-Fi.
Step 3 Tap to search available wireless networks.
Step 4 Select a wireless network and enter the password.
If no Wi-Fi is searched, tap
SSID
to enter the name of Wi-Fi.
Step 5 Tap .
2.6.4 Configuring Serial Port
Step 1 On the
Main Menu
, select
Connection
>
Serial Port
.
Step 2 Select a port type.