User's Manual

8
●
Select
Reader
when the Access Controller connects to a card reader.
●
Select
Controller
when the Access Controller functions as a card reader, and the Access
Controller will send data to the Access Controller to control access.
Output Data type:
◇
Card: Outputs data based on card number when users swipe card to unlock door;
outputs data based on user's first card number when they use other unlock
methods.
◇
No.: Outputs data based on the user ID.
●
Select
Reader (OSDP)
when the Access Controller is connected to a card reader based
on OSDP protocol.
●
Security Module: When a security module is connected, the exit button, lock will be not
effective.
2.6.5 Configuring Wiegand
The access controller allows for both Wiegand input and Output mode.
Step 1 On the
Main Menu
, select
Connection
>
Wiegand
.
Step 2 Select a Wiegand.
●
Select
Wiegand Input
when you connect an external card reader to the Access
Controller.
●
Select
Wiegand Output
when the Access Controller functions as a card reader, and you
need to connect it to a controller or another access terminal.
Figure 2-5 Wiegand output
Table 2-5 Description of Wiegand output
Parameter Description
Wiegand Output Type
Select a Wiegand format to read card numbers or ID numbers.
●
Wiegand26
: Reads three bytes or six digits.
●
Wiegand34
: Reads four bytes or eight digits.
●
Wiegand66
: Reads eight bytes or sixteen digits.
Pulse Width Enter the pulse width and pulse interval of Wiegand output.