User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
10
Table 2-6 Description of new user parameters
Parameter Description
User ID
Enter user IDs. The IDs can be numbers, letters, and their combinations,
and the maximum length of the ID is 32 characters. Each ID is unique.
Name
Enter name with at most 32 characters (including numbers, symbols,
and letters).
FP
Register fingerprints. A user can register up to 3 fingerprints, and you
can set a fingerprint to the duress fingerprint. An alarm will be
triggered when the duress fingerprint is used to unlock the door.
Only certain models support fingerprint unlock.
Face
Make sure that your face is centered on the image capturing frame,
and an image of the face will be captured and analyzed automatically.
Card
A user can register five cards at most. Enter your card number or swipe
your card, and then the card information will be read by the access
controller.
You can enable the
Duress Card
function. An alarm will be triggered if
a duress card is used to unlock the door.
Only certain models support card unlock.
PWD
Enter the user password. The maximum length of the password is 8
digits.
User Level
You can select a user level for new users.
●
User
: Users only have door access permission.
●
Admin
: Administrators can unlock the door and configure the
access controller.
Period People can unlock the door only during the defined period.
Holiday Plan People can unlock the door only during the defined holiday plan.
Valid Date
Set a date on which the access permissions of the person will be
expired.
User Type
●
General
: General users can unlock the door.
●
Blocklist
: When users in the blocklist unlock the door, service
personnel will receive a notification.
●
Guest
: Guests can unlock the door within a defined period or for
certain amount of times. After the defined period expires or the
unlocking times runs out, they cannot unlock the door.
●
Patrol
: Patrol users will have their attendance tracked, but they
have no unlocking permissions.
●
VIP
: When VIP unlock the door, service personnel will receive a
notice.
●
Others
: When they unlock the door, the door will stay unlocked for
5 more seconds.
●
Custom User 1/Custom User 2: Same with general users.
Step 3 Tap .