User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
15
the Access Controller at the same time when they unlock the door.
Prerequisites
On the main menu screen, tap
Attendance
, and then turn on the time & attendance function.
Procedure
Step 1 On the main menu screen, select
Attendance
>
Mode Set
.
Figure 2-12 Attendance mode
Table 2-8 Attendance mode
Parameter Description
Auto/Manual Mode
After you punch in/out, you can manfully select the attendance
status or the screen displays the time attendance status
automatically.
Auto Mode
The screen displays attendance status automatically after you punch
in/out.
Manual Mode
Punch in/out and then tap
Attendance status
to manfully select the
attendance status.
Fixed Mode
When you punch in/out, the screen will displays the pre-configured
attendance status all the time.
Step 2 Select an attendance mode.
Step 3 Configure the parameters for the attendance mode.