User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
18
Parameter Description
NTP Check
A network time protocol (NTP) server is a machine dedicated as
the time sync server for all client computers. If your computer is
set to sync with a time server on the network, your clock will
show the same time as the server. When the administrator
changes the time (for daylight savings), all client machines on
the network will also update.
1. Tap
NTP Check
.
2. Turn on the NTP check function and configure parameters.
●
Server IP Address
: Enter the IP address of the NTP
server, and the Access Controller will automatically sync
time with NTP server.
●
Port
: Enter the port of the NTP server.
●
Interval (min)
: Enter the time synchronization interval.
Time Zone Select the time zone.
2.10.2 Configuring Face Parameters
Step 1 On the main menu, select
System
>
Face Parameter
.
Step 2 Configure the face parameters, and then tap .
Figure 2-16 Face parameter (01)