User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
20
Name Description
Mask Parameters
●
Mask mode:
◇
No detect
: Mask is not detected during face recognition.
◇
Mask reminder
: Mask is detected during face recognition. If
the person is not wearing a mask, the system will remind
them to wear masks, and access is allowed.
◇
Mask intercept
: Mask is detected during face recognition. If a
person is not wearing a mask, the system will remind them to
wear masks, and access is denied.
●
Mask Recognition Threshold: Higher threshold means higher
mask detection accuracy.
Multi-face Recognition
Supports detecting 4 face images at the same time, and the unlock
combinations mode become invalid. The door is unlocked after any
one of them gain access.
2.10.3 Setting Volume
You can adjust the volume of the speaker and microphone.
Step 1 On the
Main Menu
, select
System
>
Volume
.
Step 2 Select
Beep Volume
or
Mic Volume
, and then tap or to adjust the volume.
2.10.4 (Optional) Configuring Fingerprint Parameters
Configure fingerprint detection accuracy. Higher value means that higher threshold of similarity and
higher accuracy.
This function is only available on Access Controller that supports fingerprint unlock..
Step 1 On the
Main Menu
, select
System
>
FP Parameter
.
Step 2 Tap or to adjust the value.
2.10.5 Screen Settings
Configure screen off time and logout time.
Step 1 On the
Main Menu
, select
System
>
Screen settings
.
Step 2 Tap
Logout Time
or
Screen Off Timeout
, and then tap or to adjust the time.
2.10.6 Restoring Factory Defaults
Step 1 On the
Main Menu
, select
System
>
Restore Factory
.
Step 2 Restore factory defaults if necessary.
●
Restore Factory
: Resets all configurations and data.
●
Restore Factory (Save user & log)
: Resets configurations except for user information