User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
24
Parameter Description
Card No. Reverse
When the Access Terminal connects to a third-party device
through Wiegand input, and the card number read by the Access
Terminal is in the reserve order from the actual card number, you
need to turn on the
Card No. Reverse
function.
Door Sensor
NC: When the door opens, the circuit of the door sensor circuit is
closed.
NO: When the door opens, the circuit of the door sensor circuit is
open.
Intrusion and overtime alarms are triggered only after door
detector is turned on.
Result Feedback
●
Success/Failure: Only displays success or failure on the
standby screen.
●
Only Name: Displays user ID, name and authorization time
after access granted; displays not authorized message and
authorization time after access denied.
●
Photo&Name: Displays user's registered face image, user ID,
name and authorization time after access granted; displays
not authorized message and authorization time after access
denied.
●
Photos&Name: Displays the captured face image and a
registered face image of a user, user ID, name and
authorization time after access granted; displays not
authorized message and authorization time after access
denied.
Recognition shortcut
Select identity verification methods on the standby screen.
●
Password: The icon of the password unlock method is
displayed on the standby screen.
●
QR code: The icon of the QR code unlock method is
displayed on the standby screen.
●
Call: The icon of call function is displayed on the standby
screen.
●
Call Type:
◇
Call Room: Tap the call icon on the standby mode and
enter the room number to make calls.
◇
Call Management Center: Tap the call icon on the
standby mode, and then call the management center.
◇
Custom call room: Tap the call icon to call the defined
room number. You need to define the number of room
first on the
Recognition shortcut
screen.
2.13 Unlocking the Door
You can unlock the door through faces, passwords, fingerprint, cards, and more.