User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
35
Parameter Description
Alternate VTS IP Addr.
Enter the IP address of the alternate VTS. When the management
platform does not respond, the alternate VTS will be activated to make
sure VTO, VTH and VTS can still realize video intercom function.
Step 3 Click
OK
.
3.5.2 Configuring Basic Parameters
Configure the basic information of VTO, such as device type and device number.
Step 1 Select
Talkback
>
Local
.
Step 2 Configure the parameters.
●
Use the Access Controller as the SIP server.
Figure 3-9 Basic parameter
Table 3-4 Basic parameter description
Parameter Description
Device Type Select
Unit Door Station
.
VTO No. The number of the VTO, which cannot be configured.
Group Call
When you turn on the group call function, the VTO calls the main VTH
and the extensions at the same time.
Centre Call No.
The default phone number is 888888+VTS No. when the VTO calls the
VTS. You can check the number of the VTS from the
Device
screen of
VTS.
Transmission Mode Mode 1 is selected by default.
●
Use other VTO as the SIP server.
Figure 3-10 Basic parameter
Table 3-5 Basic parameter description
Parameter Description
Device Type
Select
Unit Door Station
.