User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
36
Parameter Description
VTO No.
The number of the VTO.
●
The number must have four digits. The first two digits are 80, and
the last two digits start from 01. Take 8001 for example.
●
If multiple VTOs exist in the one unit, the VTO No. cannot be
repeated.
Centre Call No.
The default phone number for the management center is 888888.
Keep it as default.
Transmission Mode Mode 1 is selected by default.
●
Use the Platform (DSS Express or DSS Pro) as the SIP Server.
Figure 3-11 Basic parameter
Table 3-6 Basic parameter description
Parameter Description
Device Type Select the device type based on the installation position.
Building No.
Select the checkbox and
then enter the number
of the building where
the unit door station is
installed.
If building and unit are enabled on DSS, enter
the building number and unit number on the
web page. The building number, unit number
and VTO number must conform to the
configured parameters on DSS.
Take room 1001, unit 2, and building 1 as an
example. If building number is enabled on the
DSS and the unit is not enabled, the room
number is "1#1001". If building and unit are
both enabled, the room number is "1#2#1001".
If building is not enabled, and unit is not
enabled either, the room number is "1001". For
details, see the user manual of DSS.
Unit No.
Select the checkbox and
then enter the number
of the unit where the
unit door station is
installed.
VTO No.
The number of the unit
door station.
If multiple VTOs exist in
the one unit, the VTO
No. cannot be repeated.
Centre Call No.
The default phone number is 888888 when the VTO calls the VTS. Keep it as
default.
Transmission
Mode
Mode 1 is selected by default.
Step 3 Click
Confirm
.