User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
40
Step 2 Click
Add
and set parameters.
Figure 3-15 VTS management
Step 3 Click
OK
.
3.5.6 Viewing Device Status
When the Access Controller works as the SIP Server, you can view the status of devices that are
connected the SIP server.
On the Homepage, select
Talkback setting
>
Status
.
3.5.7 Viewing Call Logs
View all the record of outgoing calls and incoming calls.
On the Homepage, select
Talkback setting
>
Call
.
3.6 Configuring Time Sections
Configure time sections and holiday plans, and then you can define when a user has the permissions
to unlock doors.
3.6.1 Configuring Time Sections
You can configure up to 128 groups (from No.0 through No.127) of time section. In each group, you
need to configure door access schedules for a whole week. A user can only unlock the door during
the scheduled time.
Step 1 Log in to the webpage.
Step 2 Select
Time Section
>
Time Section
.
Step 3 Click
Add
.