User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
41
Figure 3-16 Time section parameters
Step 4 Enter No. and name for the time section.
●
No.
: Enter a section number It ranges from 0 through 127.
●
Name
: Enter a name for each time section. You can enter a maximum of 32 characters
(contain number, special characters and English characters).
Step 5 Configure time sections for each day.
Step 6 You can configure up to four time sections for a single day.
Step 7 (Optional) Click
Apply to the whole week
to copy the configuration to the rest of days.
Step 8 Click
OK
.
3.6.2 Configuring Holiday Groups
Set time sections for different holiday groups. You can configure up to 128 holiday groups (from
No.0 through No.127). and up to 16 time sections for a single holiday group. Users can unlock doors
in the defined time sections.
Step 1 Log in to the web page.
Step 2 Select
Time Section
>
Holiday Group
>
Config
.
Step 3 Click
Add
.
Figure 3-17 Add a holiday group
Step 4 Set the name and the time for the holiday group.
●
Holiday Name
: Enter the name of the holiday group. Enter a name for each time