User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
42
section. You can enter a maximum of 32 characters (contain numbers, special
characters and English characters).
●
Time Section
: Select the start time and end time of the holiday.
Step 5 Click
OK
.
You can add multiple holidays in a holiday group.
Step 6 Click
OK
.
3.6.3 Configuring Holiday Plans
Assign the configured holiday groups to the holiday plan. Users can only unlock the door in the
defined time in the holiday plan.
Step 1 Log in to the webpage.
Step 2 Select
Time Section
>
Holiday Plan Config
.
Step 3 Click
Add
.
Figure 3-18 Add holiday plan
Step 4 Enter a number and name for the holiday plan.
●
No.
: Enter a section number. It ranges from 0 through 127.
●
Name
: Enter a name for each time section. You can enter a maximum of 32 characters
(contain numbers, special characters and English characters).
Step 5 In the
Holiday Group No.
list, select the number of the defined holiday group.
Select
255
if you do not want to select a holiday group.
Step 6 In the
Holiday Period
area, configure time sections in the holiday group. You can
configure up to four time sections.
Step 7 Click
OK
.
3.7 Data Capacity
You can see how many users, cards and face images that the Access Controller can store.