User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
43
Log in to the webpage and select
Data Capacity
.
3.8 Configuring Video and Image
Configure video and image parameters, such as stream and brightness.
We recommend you use the default parameters in this section.
3.8.1 Configuring Video
On the home page, select
Video Setting
, and then configure the video stream, status, image and
exposure.
●
Video Standard: Select
NTSC
.
●
Channel Id: Channel 1 is for configurations of visible light image. Channel 2 is for configurations
of infrared light image.
●
Default: Restore to defaults settings.
●
Capture: Take a snapshot of the current image.
PAL video standard is 25 fps and the NTSC video standard is 30 fps.
3.8.1.1 Configuring Channel 1
Step 1 Select
Video Setting
>
Video Setting
.
Step 2 Select
1
from the
Channel No.
list.
Step 3 Configure the date rate.
Figure 3-19 Date rate