User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
46
Figure 3-21 Exposure
Table 3-13 Exposure parameter description
Parameter Description
Anti-flicker
Set anti-flicker to reduce flicker and decrease or reduce uneven colors or
exposure.
●
50Hz
: When the mains power supply is 50 Hz, the exposure is
automatically adjusted to prevent the appearance of horizontal
lines.
●
60Hz
: When the mains power supply is 60 Hz, the exposure is
automatically adjusted to reduce the appearance of horizontal lines.
●
Outdoor
: When
Outdoor
is selected, the exposure mode can be
switched.
Exposure Mode
You can set the exposure to adjust image brightness.
●
Auto
: The Access Controller automatically adjusts the brightness of
images.
●
Shutter Priority
: The Access Terminal will adjust image brightness
according to shutter exposure range. If the image brightness is not
enough and the shutter value has reached its upper or lower limit,
the Access Controller will adjust the gain value automatically for
ideal brightness level.
●
Manual
: You can configure gain and shutter value manually to
adjust image brightness.
◇
When you select
Outdoor
from the
Anti-flicker
list, you can
select
Shutter Priority
as the exposure mode.
◇
Exposure mode might differ depending on different models of
Access Controller.