User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
48
Parameter Description
Backlight Mode
●
Close
: Back-light compensation is turned off.
●
Backlight
: Black-light compensation automatically brings
more light to darker areas of an image when bright light
shining from behind obscures it.
●
Wide dynamic
: The system dims bright areas and
compensates for dark areas to ensure to create a balance to
improve the overall image quality.
●
Inhibition
: Highlight compensation (HLC) is a technology
used in CCTV/IP security cameras to deal with images that are
exposed to lights like headlights or spotlights. The image
sensor of the camera detects strong lights in the video and
reduce exposure in these spots to enhance the overall quality
of the image.
Step 4 Configure the exposure parameters.
Figure 3-23 Exposure parameter
Table 3-15 Exposure parameter description
Parameter Description
Anti-flicker
Set anti-flicker to reduce flicker and decrease or eliminate uneven
colors or exposure.
●
50Hz
: When the mains power supply is 50 Hz, the exposure is
automatically adjusted to prevent the appearance of
horizontal lines.
●
60 Hz
: When the mains power supply is 60 Hz, the exposure is
automatically adjusted to reduce the appearance of horizontal
lines.
●
Outdoor
: When
Outdoor
is selected, the exposure mode can
be switched.