User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
52
Only when the size of the face is larger than the defined size, the face can be detected
by the Access Controller.
Step 6 Click
OK
.
3.10 Configuring Network
3.10.1 Configuring TCP/IP
You need to configure IP address of Access Controller to make sure that it can communicate with
other devices.
Step 1 Select
Network Setting
>
TCP/IP
.
Step 2 Configure parameters.
Figure 3-25 TCP/IP
Table 3-17 Description of TCP/IP
Parameter Description
IP Version IPv4
MAC Address MAC address of the Access Controller.
Mode
●
Static
: Manually enter IP address, subnet mask, and gateway.
●
DHCP
：
It stands for Dynamic Host Configuration Protocol.
When DHCP is turned on, the Access Controller will
automatically be assigned with IP address, subnet mask, and
gateway.
IP Address
If you select static mode, configure the IP address, subnet mask
and gateway.
Subnet Mask