User's Manual

53
Parameter Description
Default Gateway
IP address and gateway must be on the same network segment.
Preferred DNS Set IP address of the preferred DNS server.
Alternate DNS Set IP address of the alternate DNS server.
Step 3 Click
OK
.
3.10.2 Configuring Port
You can limit access to the Access Controller at the same through web, desktop client and phone.
Step 1 Select
Network Setting
>
Port
.
Step 2 Configure port numbers.
Figure 3-26 Configure ports
Except
Max Connection
and
RTSP Port
, you need to restart the Access Controller to make
the configurations effective after you change other parameters.
Table 3-18 Description of ports
Parameter Description
Max Connection
You can set the maximum number of clients (such as web,
desktop client and phone) that can access the Access
Controller at the same time.
TCP Port Default value is 37777.
HTTP Port
Default value is 80. If you want to change the port number,
add the new port number after the IP address when you log
in to the webpage.
HTTPS Port Default value is 443.
RTSP Port Default value is 554.