User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
54
Step 3 Click
OK
.
3.10.3 Configuring Automatic Registration
The Access Controller reports its address to the designated server so that you can get access to the
Access Controller through the management platform.
Step 1 On the home page, select
Network Setting
>
Register
.
Step 2 Enable the automatic registration function and configure the parameters.
Figure 3-27 Register
Table 3-19 Automatic registration description
Parameter Description
Host IP The IP address or the domain name of the server.
Port The port of the server used for automatic registration.
Sub-Device ID
Enter the sub-device ID (user defined).
When you add the Access Controller to the management platform,
the sub-device ID on the management platform must conform to
the defined sub-device ID on the Access Controller.
Step 3 Click
Apply
.
3.10.4 Configuring Cloud Service
The cloud service provides a NAT penetration service. Users can manage multiple devices through
DMSS. You do not have to apply for dynamic domain name, configuring port mapping or deploying
server.
Procedure
Step 1 On the home page, select
Network Setting
>
Cloud Service
.
Step 2 Turn on the cloud service function.