User's Manual

56
Controller will send data to the Access Controller to control access.
Output Data type:
◇
Card: Outputs data based on card number when users swipe card to unlock door;
outputs data based on user's first card number when they use other unlock
methods.
◇
No.: Outputs data based on the user ID.
●
Select
Reader (OSDP)
when the Access Controller is connected to a card reader based
on OSDP protocol.
●
Security Module: When a security module is connected, the exit button, lock will be not
effective.
3.10.6 Configuring Wiegand
The Access Controller allows for both Wiegand input and Output mode.
Step 1 On the
Main Menu
, select
Connection
>
Wiegand
.
Step 2 Select a Wiegand.
Figure 3-30 Wiegand output
●
Select
Wiegand Input
when you connect an external card reader to the Access
Controller.
●
Select
Wiegand Output
when the Access Controller functions as a card reader, and you
need to connect it to a controller or another access terminal.
Table 3-20 Description of Wiegand output
Parameter Description
Wiegand Output Type
Select a Wiegand format to read card numbers or ID numbers.
●
Wiegand26
: Reads three bytes or six digits.
●
Wiegand34
: Reads four bytes or eight digits.
●
Wiegand66
: Reads eight bytes or sixteen digits.
Pulse Width
Enter the pulse width and pulse interval of Wiegand output.
Pulse Interval
Output Data Type
Select the type of output data.
●
No.
: Outputs data based on user ID.
●
Card No.
: Outputs data based on user's first card number.