User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
57
3.11 Safety Management
3.11.1 Configuring IP Authority
Step 1 Log in to the webpage.
Step 2 Click
Safety Mgmt.
>
IP Authority
.
Step 3 Select a cybersecurity mode from the
Type
list.
●
Network Access
: Set allowlist and blocklist to control access to the access controller.
●
Prohibit PING
: Enable
PING prohibited
function, and the access controller will not
respond to the Ping request.
●
Anti Half Connection
: Enable
Anti Half Connection
function, and the access
controller can still function properly under half connection attack.
3.11.1.1 Network Access
Step 1 Select
Network Access
from the
Type
list.
Step 2 Select the
Enable
check box.
Figure 3-31 Network access
Step 3 Select
Allow List
or
Block List
.
Step 4 Click
Add
.