User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
58
Figure 3-32 Add IP
Step 5 Configure parameters.
Table 3-21 Description of adding IP parameters
Parameter Description
Type Select the address type from the
Type
list.
IP Version IPv4 by default.
All Ports
Select
All Ports
check box, and your settings will apply to all
ports.
Device Start Port
If you clear
All Ports
check box, set the device start port and
device end port.
Device End Port
Step 6 Click
Save
, and the
IP Authority
interface is displayed.
Step 7 Click
OK
.
●
Click to edit the allowlist or blocklist.
●
Click to delete the allowlist or blocklist
3.11.1.2 Prohibit PING
Step 1 Select
Prohibit PING
from the
Type
list.
Step 2 Select the
Enable
check box.