User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
66
Figure 3-43 Maintenance
Step 3 Set the time, and then click
OK
.
Step 4 (Optional) Click
Reboot Device
, the Access Controller will restart immediately.
3.15 Configuration Management
When more than one Access Controller need the same configurations, you can configure parameters
for them by importing or exporting configuration files.
3.15.1 Exporting/Importing Configuration Files
You can import or export the configuration file of the Access Controller. When you want to apply the
same configurations to multiple devices, you can import the configuration file to them.
Step 1 Log in to the webpage.
Step 2 Select
Config Mgmt.
>
Config Mgmt.
.
Figure 3-44 Configuration management
Step 3 Export or import configuration files.
●
Export configuration file.
Click
Export Configuration
to download the file to the local.
IP will not be exported.
●
Import configuration file.
1. Click
Browse
to select the configuration file.
2. Click
Import configuration
.