User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
70
Figure 4-1 Device information
Table 4-1 Device parameters Description
Parameter Description
Device Name
Enter a name of the Access Controller. We recommend you
name it after its installation area.
Method to add
Select
IP
to add the Access Terminal by entering its IP Address.
IP Enter IP address of the Access Controller.
Port The port number is 37777 by default.
User Name/Password Enter the username and password of the Access Terminal.
Step 4 Click
Add
.
The added Access Controller displays on the
Devices
page. You can click
Add and
Continue
to add more Access Controllers.
4.2.2 Adding in Batches
We recommend you use the auto-search function when you add want to Access Controllers in
batches. Make sure the Access Controllers you add must be on the same network segment.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Device Manager
and search for devices.
●
Click
Auto Search
, to search for devices on the same LAN.
●
Enter the network segment range, and then click
Search
.