User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
71
Figure 4-2 Auto search
A device list will be displayed.
Select a device, and then click
Modify IP
to modify its IP address.
Step 3 Select the Access Controller that you want to add to Smart PSS Lite, and then click
Add
.
Step 4 Enter the username and the password of the Access Controller.
You can view the added Access Controller on the
Devices
page.
The Access Controller automatically logs in to Smart PSS Lite after being added.
Online
is
displayed after successful login.
4.3 User Management
Add users, assign cards to them, and configure their access permissions.
4.3.1 Configuring Card Type
Set the card type before you assign cards to users. For example, if the assigned card is an ID card, set
card type to ID card.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Access Solution
>
Personnel Manager
>
User
.
Step 3 On the
Card Issuing Type
and then select a card type.
Make sure that the card type is same to the actually assigned card; otherwise, the card
number cannot be read.
Step 4 Click
OK
.