User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
72
4.3.2 Adding Users
4.3.2.1 Adding Individually
You can add users individually.
Step 1 Log in to Smart PSS Lite.
Step 2 Click
Access Solution
>
Personnel Manger
>
User
>
Add
.
Step 3 Click
Basic Info
tab, and enter the basic information of the user, and then import the face
image.
Figure 4-3 Add basic information
Step 4 Click the
Certification
tab to add certification information of the user.
●
Configure password: The password must consist of 6–8 digits.
●
Configure card: The card number can be read automatically or entered manually. To
read the card number automatically, select a card reader, and then place the card on
the card reader.
1. On the
Card
area, click and select
Card issuer
, and then click
OK
.
2. Click
Add
, swipe a card on the card reader.
The card number is displayed.
3. Click
OK
.
After adding a card, you can set the card to main card or duress card, or replace the
card with a new one, or delete the card.