User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 2.1 Basic Configuration Procedure
- 2.2 Common Icons
- 2.3 Standby Screen
- 2.4 Initialization
- 2.5 Logging In
- 2.6 Network Communication
- 2.7 User Management
- 2.8 Access Management
- 2.9 Attendance Management
- 2.10 System
- 2.11 USB Management
- 2.12 Configuring Features
- 2.13 Unlocking the Door
- 2.14 Viewing Unlock Logs
- 2.15 System Information
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Configuring Door Parameter
- 3.5 Intercom Configuration
- 3.6 Configuring Time Sections
- 3.7 Data Capacity
- 3.8 Configuring Video and Image
- 3.9 Configuring Face Detection
- 3.10 Configuring Network
- 3.11 Safety Management
- 3.12 User Management
- 3.13 Configuring Voice Prompts
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrading System
- 3.17 Viewing Version Information
- 3.18 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
77
Figure 4-8 Open door
●
Click or to open or close the door.
Related Operations
●
Event filtering: Select the event type in the
Event Info
, and the event list displays the selected
event type, such as alarm events and abnormal events.
●
Event refresh locking: Click to lock the event list, and then event list will stop refreshing.
Click to unlock.
●
Event deleting: Click to clear all events in the event list.
4.4.2 Setting Always Open and Always Close
After setting always open or always close, the door remains open or closed all the time.
Step 1 Click
Access Solution
>
Access Manager
on the Home page.
Step 2 Click
Always Open
or
Always Close
to open or close the door.
Figure 4-9 Always open or close
The door will remain open or closed all the time. You can click
Normal
to restore the
access control to normal status, and then the door will be open or closed based on the
configured verification methods.
4.4.3 Monitoring Door Status
Step 1 Click
Access Solution
>
Access Manager
on the Home page.
Step 2 Select the Access Controller in the device tree, and right click the Access Terminal and then
select
Start Real-time Event Monitoring
.
Real-time access control events will display in the event list.