User's Manual

10
Parameter
Description
User Level
You can select a user level for new users. There are two options:
User: Users only have door unlock permission.
Admin: Administrators can unlock the door and also have parameter
configuration permission.
No matter whether there is an administrator in the access controller,
administrator identity authentication is needed.
Period
You can set a period in which the user can unlock the door. "See 3.7 Time Section"
for details.
Holiday
Plan
You can set a holiday plan in which the user can unlock the door. "See 3.7 Time
Section" for details.
Valid Date
You can set a period during which the unlocking information of the user is valid.
User Level
There are six levels:
General: General users can unlock the door normally.
Blocklist: Users in the blocklist do not have unlock permission. When they
try to unlock the door,
the access controller will prompt that this is a
blocklist user.
Guest: Guests are allowed to
unlock the door certain times. Once they
exceed the maximum times, they cannot unlock the door again.
Patrol: Paroling users can get their attendance tracked, but they have no
unlock permission.
VIP: When VIP unlocks the door, service personnel will get a prompt.
Other: When special people unlock the door, there will be a delay of 5
seconds before the door is closed.
Custom User 1: Reserved for customization. Users can unlock the door
normally.
Custom User 2: Reserved for customization. Users can unlock the door
normally.
Use Time
When the user level is Guest, you can set the maximum number of times that
the user can unlock the door.
Tap to save the configuration.
2.7.2 Viewing User information
You can view user list, admin list and enable administrator password through the User interface.
Access Management
You can do access management on period, unlock mode, alarm, door status, and lock holding
time.
Tap Access to go to the access management interface.